Broken Light Bulb

Sometimes, especially on exterior light fixtures, the glass bulb breaks away from the metal base. There is no best way to remove the base from the fixture, but here are several options. Before replacing an exterior light, purchase a higher quality bulb with a brass- plated or copper-plated base that will not rust. You could coat the threads with a special dielectric grease available at automotive stores. Dry lubricant, Permatex Anti-Seize, and Vaseline will also work. To remove the broken base, first make sure the power is off. Wear eye protection. Protect the immediate area from broken glass that may remain on the base. I like to use a needle nose pliers to grab the metal rim of the bulb and twist it. You can also jam the nose of the pliers into the base of the bulb to get a grip. Sometimes opening the pliers inside the metal threads will give you a grip. If all else fails, use the needle nose pliers to collapse the metal threads until you can remove them.
I Pull Out All The Stops To Sell Your Home
Lonnie Snyder
REALTOR®
Keller Williams Realty Southeast Sound
Phone: 206-406-2710
Email: snyder@kw.com
Website: http://www.callsnyder.com/
Blogsite: http://renton-real-estate.blogspot.com/
Lonnie Snyder is a full time real estate agent and REALTOR® with Keller Williams Realty specializing in Residential Real Estate for buyers and sellers in Washington’s Kent, Renton, Newcastle and South Bellevue.Oh, By The Way. . . . . I AM NEVER TOO BUSY FOR REFERRALS.